TODAY: Sat May 17 10:56:36 2008    ÐÓÑ

BULLDOZER DET-320

Diesel Engine JAMZ-7511.10-18
Operating power, kW (hp) 258 (350)
Rated speed, rpm 1700
Speed at maximum torque, rpm 1200
Cylinder quantity, pc / capacity 8 / 14,86
Cylinder diameter/Piston stroke, mm 130/140
Weight, kg 1250
Specific fuel consumption at rated power of engine g/kW h (g/hp h) 206(160)
Oil consumption by engine vs fuel consumption, %, burning loss 0,3
Transmission electric mechanical, two-speed (forward and reverse), with automatic change of the traction efforts and traverse speed.
The speeds control is automatic. The quantity of the controls is minimum.
Steering gear and brakes: due to two-stage planetary steering mechanisms two gears are available (working and transport, forward and reverse) as well as the tractor turning and braking.
The planetary steering gears are equipped with the planetary row comprising the system of the constant-mesh gear, locking friction clutch and two brakes. The planetary steering gear control is performed with a lever by means of the hydraulic servo drive.
Final drives: Two-stage, with a pair of the spur pinions and the planetary row with ratio 11.08.
The working speed of the unit, forward-reverse, m/s(km/h) min/max 0,306(1,1)/4,37(15,7)
Maximum traction force, kN (tf), not less 412,7(42,1)
Cab the quick-detachable (connector is on the floor) cab is two-seat, all-metal construction with circular glass cover, heat-and-noise insulation, air heater and conditioner "RIO 3000".
Mark: GPA-222
Power, kW/ Rated voltage, V/ Current, À 220/310/710
Speed, rated/maximum rpm 2120/2550
Weight, kg 1250
Traction Motor mark: EDP-196
Power, kW/ Rated voltage, V/ Current, À 196/305/710
Speed, rated/maximum rpm 430/2250
Weight, kg 2500
Rated voltage, V 24
Charging generator power, kW 6,5
Storage battery number, pc 4
Running Gear the bogies are welded of rectangular cross section. The suspension is torsion one and separate for each bogie wheel, fixed at the bogie frames. The idlers are designed as the solid units of closed type.
Number of bogie wheels/carrier rollers, pcs 12/4
Track shoe width, mm / number of shoes, pcs 690 / 56
Track tightening mechanism hydraulic
Suspension: elastic, torsion, separate for each bogie wheel
Track, link number per each belt , pcs/pitch, mm 56/218
Shoe width, mm 690
Grouser height, mm 70
Lifting and deepening of blade and ripper: Joint operation of two pumps NSH-100
Maximum discharge pressure, MPa (kgf/square cm) 10,0+0,5 (100+5)
Two-valve four-position distributor
Blade tilting of bulldozer, adjustment of loosening angle and ripper leg: One pump is oerated NSH-100
Maximum discharge pressure, MPa (kgf/square cm) 10+1 (100+10)
Two-valve three-position distributor
Bulldozer Equipment semispherical unturning blade with fully hydroficated tilting and cutting angle change control (data on coal blade is given in brackets)
Drawing prism volume, cubic meters 10,5 (19,5)
Width/height of blade, mm 4250 (5000)/1850 (1900)
Maximum blade lifting, mm 1225
Maximum blade deepening, mm 500
Main cutting angle, degrees 55
Blade cross tilting angle, degrees 10
Weight, kg 5200 (6590)
The tractor can be completed with the coal blade of drawing prism volume 19.5 cubic meters and with the narrow blade of the ry dimensions
It is designed as quadric-crank mechanism with a single-tooth ripper and adjustable cutting angle
Maximum deepening, mm 1545
Loosening angle change range, degrees 40 ... 65
Weight, kg 4280
Fuel system, l 680
Hydraulic system, l 165
Engine cooling system, l 76

Operating weight, kg
Tractor /length/width/height, mm

35500
/6750/3180/3990*
Operating weight, kg
Bulldoze /length/width/height, mm
40600
/7470/4250/3990*
 45000
/8720/4250/3990*
Gauge/Base, mm 2450/3200
Specific mover pressure on ground of tractor
/bulldozer with ripper MPa (kg/cm2)
0,083(0,83)
/0,104(1,04)
* - without FOPS-ROPS, with FOPS-ROPS - 4030
Loading...
EXCHANGE RATES
WEATHER
REITING@Mail.ru"/
   © 2002-2008 «SDM Technologies»
P.O.BOX, 5775, 454048, Chelyabinsk,Russia
Tel.: +7 (351) 900-00-34, 231-12-07
980